OpenFOAM web server

OpenFOAM web server - a step toward Digital Twins

Please provide the model inputs in below.

Inlet flow rate (m³/s):

Since the model domain is small (2D) in volume, the maximum allowed value is 0.002 (m³/s) to avoid numerical instabilities due to flooding.

Switch for water inlet [0=flow-OFF; 1=flow-ON]:

The input value should be either 0 or 1. In case of emptying the water from the domain use 0.

Porosity (top layer):
Porosity (middle layer):
Porosity (bottom layer):

The input value in all 3 layers MUST be between 0.05 and 0.99 to have a robust model performace.

Initial fraction of water in the cell [0=no water (dry); 1=fully saturated/no air]:

The input value for the initial water fraction MUST be bigger than 0 and smaller than 1.

Total (flow) simulation time (s):

Input a suitable simulation time or use the default one.

Users are allowed to record the screen (use e.g. ScreenToGif tool) to make an animation of the following continuously changing results.